Termite and Mold Inspections

Condoinspectors.com is dedicated to the detection and prevention of mold to protect you, your family and your property. Professional Mold Inspectors use scientifically proven procedures to obtain the highest degree of reliability and constantly update their reporting techniques to provide the most accurate report possible. At Condoinspectors.com we pride ourselves on providing qualified inspectors in your area to inspect your property. Get a free quote today for personalized service and the highest quality inspection reporting available. The instant quote for mold inspections are not guaranteed due to the amount of variables; however our quote calculator will give you a good idea on the cost of an inspection and will allow you to find professional inspectors in your area.

Your inspection

Your mold inspector will generally take between 30 and 45 minutes to complete the inspection, with larger structures taking longer periods of time. The subject property should have had all windows and doors shut for a minimum of 24 hours before the testing begins. The HVAC system(s) (air conditioning or heating) should be running. Also, be prepared to point out any suspected problem areas to your inspector. Once the inspector completes the onsite inspection, the results will be sent to the laboratory for analysis. The lab results will take between two to four days after to be completed. Finally, when the inspector receives the lab results they will prepare the final report. With the final report you will have a good idea on the condition of your property.

About mold

Mold can be found in several areas of the indoor environment and is caused by a variety of moisture, heat and humidity issues. It appears most often as little black circles or thread-like white objects and it is usually accompanied by a musty odor. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or un-addressed. Mold reproduces by means of microscopic spores. The spores are invisible to the naked eye and float freely throughout the indoor and outdoor air. There is no practical way to eliminate all mold spores in the indoor environment. The way to control indoor mold growth is to control moisture. Mold will NOT grow without water or moisture; therefore it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth.

Why inspect for mold?

There are many reasons to inspect for mold, which vary from health concerns to the structural integrity of your home. Benefits of a mold inspection include assurance of safe air quality, discovery of water damage, discovery of toxic mold (toxic mold is a subset of fungi that produces a fluffy or powdery growth on surfaces), improved health conditions of home if mold discovered and removed, protecting property investment, Doctors may find assistance with diagnosis, legal association between mold and an illness, and as tool for Real-Estate Brokers who can present mold-neutral properties.

Types of mold tests

There are three primary means of testing for mold, each is described below. Most mold inspections involve a visual inspection and a minimum of two air or swab samples.

Visual Inspection - As its name implies, this type of inspection involves carefully reviewing areas where mold is commonly found. Because mold cannot live without moisture, sources of moisture are one of the focal points of our investigation. A hygrometer is often employed to locate disproportionately damp areas.

Air Sampling - The purpose of air sampling is to determine the type and amount of airborne contamination in a building. Air sampling may be necessary if the presence of mold, allergens, or toxins is suspected but cannot be confirmed by visual inspection. When air sampling is performed, both the indoor air and outdoor a